CORRUGATED HINGE PIN 6" BELTS
SKU: 519-14991
6" CORRUGATED HINGE PIN USED WITH ALLIGATOR RIVET LACING. 8 PINS PER PACK
6" CORRUGATED HINGE PIN USED WITH ALLIGATOR RIVET LACING. 8 PINS PER PACK
$44.732
Sold out
STAPLE BELT FASTENER
SKU: AL125J24
Flexco Alligator #125 Staple joint with nylon covered steel pin, 24 inches wide, for belt thickness 1/8 inch-3/16 inch, minimum pulley diameter 3 inch. Four complete joints per carton, this will lace four complete belts. Includes: lace, pins, staples, retaining washers, and instructions. Note: Alligator Installation Tools must be used to properly install Alligator Staple Fastener Sets.
Flexco Alligator #125 Staple joint with nylon covered steel pin, 24 inches wide, for belt thickness 1/8 inch-3/16 inch, minimum pulley diameter 3 inch. Four complete joints per carton, this will lace four complete belts. Includes: lace, pins, staples, retaining washers, and instructions. Note: Alligator Installation Tools must be used to properly install Alligator Staple Fastener Sets.
$453.728
Sold out
STAPLE BELT FASTENER
SKU: AL187J24
Flexco Alligator #187 Staple joint with nylon covered steel pin, 24 inch wide, for belt thickness 3/16 inch-1/4 inch, minimum pulley diameter 4 inch. Four complete joints per carton, this will lace four complete belts. Includes: lace, pins, staples, retaining washers, and instructions. Note: Alligator installation tools must be used to properly install Alligator staple fastener sets.
Flexco Alligator #187 Staple joint with nylon covered steel pin, 24 inch wide, for belt thickness 3/16 inch-1/4 inch, minimum pulley diameter 4 inch. Four complete joints per carton, this will lace four complete belts. Includes: lace, pins, staples, retaining washers, and instructions. Note: Alligator installation tools must be used to properly install Alligator staple fastener sets.
$159.878
Sold out
CORRUGATED PIN 7 IN
SKU: ARSH7
Replacement hinge pin, Steel corrugated hinge Pin, for Alligator rivet lacing. Belt width: 7" 8 per package **
Replacement hinge pin, Steel corrugated hinge Pin, for Alligator rivet lacing. Belt width: 7" 8 per package **
$99.003
Sold out
FASTENER PACKAGE
SKU: CLAR6
Rivet lacing, Alligator rivet lacing system for belt width 6 inch Self-setting rivets accommodate belts from 1/8 inch to 7/32 inch thick, including new or used, 2-ply and 3-ply belts. Each package includes fasteners, rivets, and hinge pins for 2 complete splices. **
Rivet lacing, Alligator rivet lacing system for belt width 6 inch Self-setting rivets accommodate belts from 1/8 inch to 7/32 inch thick, including new or used, 2-ply and 3-ply belts. Each package includes fasteners, rivets, and hinge pins for 2 complete splices. **
$180.786
Sold out
FASTENER PACKAGE
SKU: CLAR7
Rivet lacing, Alligator rivet lacing system for belt width 7 inch Self-setting rivets accommodate belts from 1/8 inch to 7/32 inch thick, including new or used, 2-ply and 3-ply belts. Each package includes fasteners, rivets, and hinge pins for 2 complete splices. **
Rivet lacing, Alligator rivet lacing system for belt width 7 inch Self-setting rivets accommodate belts from 1/8 inch to 7/32 inch thick, including new or used, 2-ply and 3-ply belts. Each package includes fasteners, rivets, and hinge pins for 2 complete splices. **
$160.682
Sold out
APPLICATOR TOOL
SKU: CLART14
Rivet installation tool(standard), for Alligator Rivet splice, tool width 14" Using this specially made installation tool and a one-pound hammer, fasteners can be installed on-site without removing belts from the baler. **
Rivet installation tool(standard), for Alligator Rivet splice, tool width 14" Using this specially made installation tool and a one-pound hammer, fasteners can be installed on-site without removing belts from the baler. **
$1.505.640
Sold out
APPLICATOR TOOL
SKU: CLART7
Rivet installation tool(standard), for Alligator Rivet splice, tool width 7" Using this specially made installation tool and a one-pound hammer, fasteners can be installed on-site without removing belts from the baler. **
Rivet installation tool(standard), for Alligator Rivet splice, tool width 7" Using this specially made installation tool and a one-pound hammer, fasteners can be installed on-site without removing belts from the baler. **
$860.251
Sold out